NEW ORIENTAL IMMInjection Molding SystemsRequest a machine fit
Menu
03
ENGINEERING / DECISION SUPPORT

Engineering questions that lead to better machine decisions.

Use the same selection logic from early sizing through quotation and acceptance: define the molding job, compare architectures on common inputs, then verify the complete production cell.

TOPICENGINEERING RESOURCEDECISIONKEY QUESTIONS
CHECKLIST

Machine RFQ checklist

Procurement input

Data that makes a quote useful

PUBLISHED DECISION PATH

Three pages. Three different buyer decisions.

Start with the query that matches the current project stage, then use the contextual links to carry confirmed inputs forward.

DISCOVERY / SELECT

How to select an injection molding machine

Use a five-step sequence from molded part to acceptance scope.

Read the selection guide
INFORMATION / SIZE

Mold envelope and shot size

Collect the clamping-unit and injection-unit inputs without mixing them.

Open the machine-fit guide
ARCHITECTURE / SITE / ACCEPTANCE

Six more pages for decisions after the first shortlist.

Compare alternatives on common project inputs, carry the chosen system into site planning, and agree how factory and site evidence will close the purchase requirements.

EU MARKET / DOCUMENTS

EU CE documentation release

Fix the legal date, product status, operator roles, declarations, marking and standards evidence before release.

Build the EU document register
SIZE / MATERIAL / LIFECYCLE

Seventeen decision pages from engineering inputs to production release.

Keep calculations tied to their evidence, compare lifecycle costs on one boundary, and define how the configured machine enters normal production.

MATERIAL / DRYER INTERFACE

Resin dryer and machine-feed interface

Pair the exact resin and supplier document with the dryer/bin path, residual-moisture evidence and explicitly non-final EUROMAP 82.6 scope.

Build the dryer-interface register
ACCEPT / MAXIMUM CLAMPING FORCE

Maximum clamping-force evidence

Keep nominal/rated force, the selected EUROMAP 7 basis, measured result, limitations and disposition in separate controlled fields.

Build the machine-side acceptance record
ACCEPT / NOMINAL OPENING FORCE

Nominal opening-force evidence

Keep the quoted value, selected EUROMAP 8 basis and controlled result separate from opening stroke, demolding, ejector and cycle performance.

Build the opening-force acceptance record
ACCEPT / PLATEN PARALLELISM

Platen-parallelism evidence

Keep drawings, mold fit and maximum force separate from the EUROMAP 9 method, test state, raw readings and disposition.

Build the platen-parallelism record
PROCESS / CAVITY-PRESSURE CHAIN

Cavity-pressure measurement and monitoring

Map one mold, cavity and channel from the proposed sensor relationship through validity, output ownership and configured evidence.

Build the measurement-chain register
PROTECT / MOLD CLOSE

Mold protection checklist

Define the monitored travel window, method, tolerance, response and acceptance evidence.

Specify mold protection
CONTROL / HOT RUNNER

Hot-runner controller and interface

Separate mold-side zones, sensors, heaters, plugs and valves from the proposed controller and cell scope.

Build the hot-runner RFQ schedule
THERMAL / MOLD CIRCUITS

Mold temperature-control interface

Pair each controlled mold circuit with the identified TCD, machine endpoint, data scope and evidence.

Build the thermal-interface register
FIT / EJECTOR + MOLD

Ejector stroke, force and handoff

Pair mold demand with machine motion, load path, coupling, part removal and robot evidence.

Review the ejector interface
MOLD / CORE-PULL AXES

Core-pull and unscrewing interface

Release each linear, rotary or compound mold mechanism with its own power, feedback, sequence and recovery evidence.

Build the per-axis register
ACCEPT / PLASTICIZING CAPACITY

Plasticizing-capacity evidence

Keep the quoted field, exact configuration, selected EUROMAP 19 basis, raw record, result limitations and disposition together.

Build the plasticizing-capacity record
MATERIAL / HARDWARE

Screw and barrel by resin

Route grade-specific questions across geometry, wear, corrosion and changeover.

Open the material review
MATERIAL / DOSING INTERFACE

Machine and dosing-system interface

Pair each material component with the identified dosing topology, feed point, cycle/data relationship and evidence.

Build the dosing-interface register
LSR / DEDICATED CELL INTERFACE

LSR machine and dosing-system interface

Fix the A/B material, LDS, LSR injection unit, cold-side path, cold-runner, synchronization and acceptance evidence as one dedicated branch.

Build the LSR cell register
OPERATE / CHANGEOVER

Mold change and startup

Connect safe site procedures, interfaces, recipe control and first-off release.

Plan the production handoff
DATA / INTEGRATION / HANDOVER

Nine evidence registers for the final procurement and site decisions.

Normalize catalogue fields, keep energy inside the test method, and carry configured-machine evidence through interfaces, physical planning and lifecycle handover.

MATERIAL / ORDER + TRACE EVIDENCE

Central material-supply orders and traceability

Separate sources, destinations, routes, supply orders, lots, exceptions and reconciliation from machine and peripheral records.

Build the central-supply register
MOLD / IDENTITY + DATA

Mold identification and data interface

Separate released mold identity and engineering records from runtime scope, permissions and configured evidence.

Build the mold-data register
LOCAL TOOL / COMPARE

Multi-quote specification comparison

Keep original values, normalized entries, missing fields and verification references visible.

Open the comparison workspace
INJECTION / NORMALIZE

Injection speed vs rate

Separate screw linear speed, volume flow and actual fill evidence.

Normalize injection data
ENERGY / BOUNDARY

Energy comparison methods

Separate machine-related, product-related, complete-cell and cost evidence.

Define the energy boundary
CELL SAFETY / EXTERNAL DEVICE

External safety-device interface

Separate the machine-to-guard boundary from robot, auxiliary, legal and validation responsibilities.

Build the external-device register
LIFECYCLE / HANDOVER

Spare parts and service handover

Connect asset identity, critical parts, backups and support entry.

Prepare lifecycle handover
SITE / PHYSICAL PLAN

Layout, rigging and foundation

Coordinate configured drawings, handling routes, access and site review.

Plan the physical site
PROJECT FIT CHECKS

Six checks before a machine shortlist.

Use one sequence from the first inquiry through technical review so the machine, mold, auxiliaries and acceptance plan stay aligned.

01

Part

Geometry, projected area, shot weight, tolerance, cosmetic zones and resin behavior.

02

Mold

External size, weight, thickness, tie-bar clearance, daylight, ejection and core motion.

03

Process

Cavity count, runner, injection profile, plasticizing demand and target cycle.

04

Cell

Part removal, robot, auxiliaries, interfaces, utilities, layout and installation access.

05

Acceptance

Trial material, mold, sampling plan, output target and quality checkpoints.

06

Lifecycle

Changeovers, maintenance access, operator training, critical spares and support plan.

01DEFINE

Part, mold, resin, output target and production constraints.

02MATCH

Drive, clamp, injection unit, auxiliaries and cell architecture.

03VERIFY

Mold fit, interfaces, utilities, trial plan and acceptance scope.

FROM REQUIREMENTS TO RFQ

Put the selection framework to work.

Open the project-fit worksheet
WhatsApp+86 134 1703 0422